300M Remote Range Waterproof Dog Shock Collars For Training | WT916

Main Features

√   remote control distance of up to 300 meters, at the same time or asynchronous training 2 dogs (need to have 2 receivers);
√   the receiver and the transmitter can be charged at the same time, optional British regulations, the US regulatory, Australian regulations and the European regulations head;
√   good waterproof performance, the dog in the water for 2-3 hours are no harm;
√   four working modes: current stimulation, vibration, beep and LED lighting;
√   0-100 stall current stimulation and vibration intensity, high current stimulation, effective response to stubborn dog;
√   the unique energy-saving design, 1 minute does not operate automatically enter the standby state and instruction memory storage function;
√   ultra-durable TPU dog belt, the length from 18-68 cm adjustable


The WT-916 E-collar is designed with basic pet dog training functions: beep, vibration, static shock. What makes it different is it’s One-Stop training system. You don’t need to remember the buttons with their different functions, you may press ” the other buttons ” by mistake. For WT-916, you just need to press the ” Mode ” to choose the training method you want, and press ” Y ” for final confirmation. In this way, you can get your dog well-trained effectively.

The WT-916 is an E-collar with wide stimulation range for vibration and static shock, you can choose the proper levels depending on how your dog reacts while training, it goes well with a large range of dogs with different sizes. The No Jump design can protect the dog from sudden increase in intensity. make the training experience safe and enjoyable.

No more worry about the water problem, the receiver could be submersed underwater for 2-3 hours giving your dog enough time to enjoy the cool summer, and the comfortable TPU collar could make sure the receiver is fastened in a proper way, and don’t forget the 300m remote control range, can you imagine your dog swimming towards you with a waterpolo after a press on the buttons.

No need to go through stores for batteries to fit in the articles, you can get the transmitter and receiver charged at the same time with one charger, easy and effective ! The whole set is matched with lithium Battery with good quality.

Packing Detail
For 1 Dog   For 2 Dog
Transmitter         x 1 Charging Cable         x 1 Transmitter         x 1 Charging Cable         x 1
Recvier         x 1 Contact Probes         x 4 Recvier         x 2 Contact Probes         x 8
TPU Strap         x 1 Test Light         x 1 TPU Strap         x 2 Test Light         x 1
Charger         x 1 Use Manual         x 1 Charger         x 1 Use Manual         x 1
Antenna         x 1 Antenna         x 1
Package List
For 1 Dog   For 2 Dog
PACK STYLE: Color box PACK STYLE: Color box
NET Weight (kg): 16.4KGS NET Weight (kg): 21KGS
GROSS Weight (kg): 17.4KGS GROSS Weight (kg): 22KGS
CTN/SIZE (cm): 40X34X46CM CTN/SIZE (cm): 40X34X46CM
Single Packing : 19.5X14.5X4.5CM Single Packing : 19.5X14.5X4.5CM


Correction system:

1. Pre-correction warning tone: when the dog reaches the edge of the signal field it will hear a warning tone that lasts about two seconds. If the dog does not return to the safe area, itwill receive a continuous correction by warning tone & static shock until it returns to the area.
2. Run-through prevention: the receiver automatically increases the correction as the dog apporach to the signal edge. The dog cannot “run through” the signal field without receiving astrong correction

dog shock collar wt-619

Dog Shock Collar WT-916 How Do Buttons Work
LED Screen Static Mode: Under this mode, when “Y” button is pressed, the collar-receiver
will shock; static levels can be adjusted from 0 to 100 by pressing the UP/DOWN button.
Vibration Mode: Under this mode, when “Y” button is pressed, the collar-receiver will vibrate; vibration levels can be adjusted from 0 to 100 by pressing the UP/ DOWN button.
Beep Mode: Under this mode, when “Y” button is pressed, the collar-receiver will give a warning beep.
Light Mode: Under this mode, when “Y” button is pressed the green LED light the receiver will flash every one sec, rendering it convenient to locate your pet:
(esp. in the dark). ½ button indicates channel 1 or 2 on the transmitter, Select one channel for use with one collar-receiver.
Channel Button When the CHANNEL button “1/2” is pressed, you can sync the
collar-receiver and the transmitter via different channel.
Launch Button  It indicates the LAUNCH button, which will send the correction signal to the collar-receiver
Mode Button It indicates audio, vibration and static-shock correction modes
on the LCD-display screen.

To turn the Transmitter on

To turn on/off the transmitter, press any button on the transmitter.Press the MODE button to toggle among 4 different modes. Press IP/DOWN buttons on the lights hand side of the transmitter to adjust the intensity level of vibration or static shock. “1/2” button indicates either channel 1 or channel 2 on the transmitter. Select one channel for use with one collar-receiver.The remote transmitter will go into STANDBY MODE if no operation for 2 minutes and will turn off if no operation for 5 minutes. In STANDBY MODE, press any button to wake it up. When turned off, press and hold the MODE button for 1 second to turn on the transmitter.

dog shock collar wt-619
dog shock collar wt-619
dog shock collar wt-619

To turn the Receiver Collar on

Turn on the remote transmitter by pressing any button on the transmitter.Select channel 1 or 2.Press ON/OFF button on the collar-receiver to turn it on. Press ON/OFF button afresh and hold it for 5 seconds, and then the LED light will start to flash.Now you can hear the first beep from the collar-receiver and then press the “Y”button (of the transmitter) immediately.You will hear the second beep from the receiver, which signifies that the transmitter and the receiver have been synced.To sync the transmitter and the second receiver, repeat step 2 through 6.Please be sure to choose the other channel.

dog shock collar wt-619
dog shock collar wt-619

Connect transmitter and receiver:

If your Receiver Collar does not beep when the TONE Button of the Remote Transmitter is pushed, or if you feel the Receiver Collar is not responding to the Remote Transmitter, follow these steps:

1. With the Receiver Collar off your pet, turn the Receiver Collar off. Restart, press and hold the On/Off Button until the Green LED flashes every second on the Receiver Collar. This continues for 16 seconds, within which pairing should be completed.

2. Press and hold the TONE and VIBRA Button of the Remote Transmitter at the same time until the Green LED Light on the Receiver Collar flashes rapidly for 5 times, indicating pairing is completed

dog shock collar wt-619

How to find the best Vibration/Shock Level

The unit comes with Up and Down buttons to control the Vibration/Shock Level, with Level 1 being the lowest level and Level 16 being the highest. The level of Vibration/Shock best suited for your dog depends on your dog’s temperament and threshold for vibration / Shock. Always start at the lowest level and work your way up. The appropriate level can be found when the dog responds to the Vibration/Shock with a mild reaction, such as a tensing of the neck muscles. The Vibration/Shock Level may vary depending on the training situation. When highly distracted, dogs will require a higher level of Vibration/Shock.

Copyright © 2019 Shenzhen Wellturn Technology Co., Ltd | All Rights Reserved | Powered by Nocti Solution