Installation of fence system
To make sure the fence system can be running smoothly, you should design a diagram of the fence area at first. Then mount the transmitter nearby the AC outlet, set the boundary with wire and flags, place the receiver collar into the neck of your dogs Please install the system as below steps:
Step 1: Mount the transmitter
To make transmitter work properly, you should ensure there is a 110/220 VAC outlet nearby before mounting it. Place the transmitter at a wall or tree and fixed it with screws.
Step 2: Install the boundary flags and Connect the wire
Connect one terminal of the wire to transmitter firstly, mount the boundary flags one by one according to the boundary layout, and make sure the wire goes through the hole of flags meanwhile. Until all the flags have been mounted properly along the boundary and come back to the transmitter Please keep the excess wire around the bobbin and connect the terminal of wire to the transmitter.
Step 3: Set parameters for the transmitter
The signal field is the distance from the wire to the place Where the collar receiver first activates. Pushing ON/OFF button to turn on/off the transmitter power. The control range means the shortest distance between the boundary wire and the collar receiver. The value of the power level is bigger and the control range is bigger. Press ON/OFF button to turn on the transmitter, the “+”/ “-” button on the transmitter can adjust the transmitter signal intensity, not the correction intensity. Push the”+” button increase the control range and “-” button for decreasing it.