Operation manual between Remote transmitter and Training Collar
Before use, please make sure you already encode the Remote Transmitter with Training Collar, and also choose the right channel.Turn on/off the Remote Transmitter and the Training Collar(please refer to brief introduction or How to set the Training Collar to work with a Remote Transmitter)Press the Mode Button to choose V or S mode as your needs.For V mode – vibration mode, there are 9 intensity levels. Please use UP/Down Button to adjust them.For S mode – Shock Mode, there are 9 intensity levels. Please use UP/Down Button to adjust them.Press Transmitter button Y to send the signal to the Collar Receiver
Operation manual between Remote transmitter and the Remote Beeper
Press the ON/OFF button to turn on the Remote Beeper, the Green indicator light flashes twice per seconds. Now the Remote Beeper is in the Standby status.Turn the Remote Beeper off (the Green Led light will be turned off)Press and hold ON/OFF button for 3 seconds, the Beeper indicator light will come on and keep lighting for 10 seconds. You could choose channel 1 or 2 by pressing Mode button and then press the Operation Button Y to confirm. The confirmation must be done within those 10 seconds, otherwise, you have to turn it off and repeat the steps.For extra Remote Beeper, just choose the different channel and repeat the above.
How to find the best Vibration/Shock Level
The unit comes with Up and Down buttons to control the Vibration/Shock Level, with Level 1 being the lowest level and Level 16 being the highest. The level of Vibration/Shock best suited for your dog depends on your dog’s temperament and threshold for vibration / Shock. Always start at the lowest level and work your way up. The appropriate level can be found when the dog responds to the Vibration/Shock with a mild reaction, such as a tensing of the neck muscles. The Vibration/Shock Level may vary depending on the training situation. When highly distracted, dogs will require a higher level of Vibration/Shock.