150 Yard Remote Range No Shock Training Collars For Small Family Dogs | WT714

Main Features

1.150 yard controlling range with low power consumption design.
2.100% brand new for UK Market E Collar with No Shock Corrections.
3.Uses vibration instead of static stimulation;
4.Ideal E collar for small family dogs with 2 levels for vibration and whistle;
5.Whistles and low frequency vibration of the receiver can be used for pet training;
6.High frequency vibration of the collar will stop the improper deeds of the pet;
7.LED signal light and illumination at night, you can look for your dog easily at night.
8.Ideal for call and training SMALL dogs;


The WT-714 is specially designed for small dogs in size, the transmitter is small enough to fit in you pocket. The whole set is functioned with vibration and warning sounds, 100% safe for dog training, by using this E-collar, you can get your puppy controlled with 150 yards, stop him from improper manner effectively.

No need to worry about your dog’s toleration ability towards stactic shock, there is no shock at all,100% safe for small dogs. Besides, this item has a large market demand in shock banned areas, help the owner get their trained in a milder method.

WELLTURN WT-714 could be a ideal choice for small dog training, apart from the No Shock design, the vibration levels are just right for the small dogs, there are 2 levels available, weak and strong, quite easy to use and 100% safe !

Packing Detail
For 1 Dog
Transmitter         x 1 Use Manual         x 1
Receiver         x 1 Screw         x 3
Nylon Strap         x 1 23A battery         x 1
AAA*1.5V battery         x 2 Screwdriver         x 1
Package List
For 1 Dog
PACK STYLE: Color box
NET Weight (kg): 12.3KGS
GROSS Weight (kg): 13.3KGS
CTN/SIZE (cm): 44X34X37CM
Single Packing : 16X10.5X5CM


Check Before Use

Place the unit around your dog’s neck and adjust the collar length using the slide buckle arrangement provides with the strap. The unit should fit snugly underneath your dog’s neck. Make sure that the electrodes are in directcontactwith your dog’s skin, Hair between the electrodes and skin will severely diminish the shock effect. If necessary, It’s advisable to clip or shave your dog’s fur under the neck to insure direct contact.
Checking the Remote Controller
Press the buttons on the Remote Controller respectively. The indicator light turns on for every pressing, If the light gose dim or cann’t be lit up, you need to replace the battery.
Checking the Receiver
Install the batteries coming with the package, the receiver beeps for successfull installation, otherwise you need to take out the batteries and try again 10 seconds later.


Dog Training Collars WT-714 How Do Buttons Work
Strongly vibrate button Use this button to correct dog behavior when you encounter a bigger dog or tenacious dog.
Slightly vibrating button This button controls the receiver to give a slight vibration. Suitable for smaller dogs.
Beep training Voice prompt button to correct the dog’s error.
Light button Light button. When the button is pressed, the LED on the receiver lights up.

Best Dog Training Collar Transmitter

The system works with 3 functions in total, the beep sound can be treated as the mildest training method for your dog, and it’s also the most suggested way to stop your dog’s unwanted behavior after he has a clear idea of the training system and the light button is for dog seeking when it’s dark outside. For vibrate training, you can choose the weak correction for the initial training, and the strong level could be chosen for the extremely improper manner.


Connection Between Transmitter and Receiver

Make sure the transmitter has been turned on and could work normally, then install the battery into the reciever, you will hear a clear beep sound from the reciever, move transmitter close to receiver and press any button, the receiver delivers a series beeps sound, then try the vibrate button to see wheather they are well connected.


Change of Batteries & Power-saving Design

Change of batteries:
1.Receiver: Screw off the two screws in the bottom cover with an adequate tool, remove the bottom cover and change the two batteries (model: AAA / 1.5V). Pay attention to the anode and cathode of the batteries. Then mount back the bottom cover.
2.emote controller: Remove the battery cover at the lower part of the back of the remote controller by pushing it following the arrow, change the batteries (model: 23A 12V ) and then mount back the battery cover.

Power-saving desgin
The vibration triggering switch is install inside of the reciever, and the system would connect the power automatically when it vibrates, and the receiver will be in a standby mode. It would cut off the power after 5 minutes without operation.

How to find the best Vibration/Shock Level

The unit comes with Up and Down buttons to control the Vibration/Shock Level, with Level 1 being the lowest level and Level 16 being the highest. The level of Vibration/Shock best suited for your dog depends on your dog’s temperament and threshold for vibration / Shock. Always start at the lowest level and work your way up. The appropriate level can be found when the dog responds to the Vibration/Shock with a mild reaction, such as a tensing of the neck muscles. The Vibration/Shock Level may vary depending on the training situation. When highly distracted, dogs will require a higher level of Vibration/Shock.

Copyright © 2019 Shenzhen Wellturn Technology Co., Ltd | All Rights Reserved | Powered by Nocti Solution